Place of Origin:
CHINA
Brand Name:
XINYU
Model Number:
LPG5
LPG5 Centrifugal Spray Dryer
Preface
Our company produces the latest LPG series centrifugal spray drier and YPG series spray granulation, drying equipment, drying technology and has more than 20 years of professional and technical staff and technical staff.The company equipment is novel, and according to user needs to design large, medium and small various modern drying equipment.The company has strong technical force, advanced equipment, good service, the user is supreme, in the drying industry to modern face the latest equipment show at home and abroad.
High speed centrifugal spray drier is a new type of high efficient drying technology and equipment, it can make the solution, emulsion, suspending liquid, paste, liquid or other materials, after spray drying in the dry powder, fine granular products.Its fast drying speed, high efficiency, less process, save manpower.Especially for heat-sensitive materials, can keep the material color, aroma and taste.Good quality products, dry goods and good fluidity, good solubility, high purity, good environmental health, to improve production, and good product quality and economic benefit.In the chemical industry, light industry, building materials, food, pharmaceutical, biochemical, environmental protection, forest industries have broad prospects.
Working principle
Its principle of work is the air through the filter and heating devices, into the drying chamber at the top of the hot air distributor, through the hot air distributor of hot air evenly into the drying chamber, and spiraling flow, at the same time will be sent to the device in the drying chamber of material liquid at the top of the centrifugal spray head, feed liquid is atomized into tiny fog droplets, make the material liquid significantly increased surface area of contact with the hot air, moisture evaporate quickly, dry products within a very short time
The characteristics of the centrifugal spray drying machine
One, the drying speed quickly.Material liquid after centrifugal spray surface area increased greatly, in high temperature air flow, the moment will evaporate 95-98% water, drying time only a few seconds.
Second, adopt and flow pattern form can make the droplet spray drying and hot air same direction flow, while hot air temperature is higher, but as a result of dry hot air into the indoor immediately contact with the spray droplets, indoor temperature drops, not make the dry material overheating, so it is suitable for drying thermal sensitive material.
Three, wide range of use.According to the properties of the material can be used hot air drying, you can also use the cold wind model.A large number of characteristic difference is very big in the product can use this machine production, has the following kinds of commonly used: essence of spices and other food additives, polymer and resin, dye, color pigment, ceramics, glass, herbicides, insecticides, carbohydrates, milk egg products, tannins, a by-product of slaughterhouses, blood and fish products, detergents and surfactants, fertilizers, organic compound, inorganic compound class.
Four, because the drying process is done in an instant, the product of the particles can basically keep globular droplets approximation, the product has good dispersion, fluidity and solubility.
Five, the production process is simple, convenient operation and control.Spray drying used in the solution of 40-60% moisture content, special material even 90% moisture content can also be a dry powder products.Most of the products after drying, crushing and screening don't need to, reduced the production process, simplify the production process, improve the purity of the products.For the product particle size, bulk density, moisture, within a certain range, can change to adjust the operating conditions, control and management is very convenient.
Six, in order to make the material from pollution and extend the service life of equipment, all parts contacting with materials, all use SUS304 stainless steel (including material liquid pipe grade for health nylon hose) materials.For convenient operation, the control system adopts the integrated operation, namely of the various components in the control cabinet is installed the indicating device and lifting device.
Technical specifications
MODEL | LPG-5 | LPG-25 | LPG-50 | LPG-100 | LPG-150 | LPG-200~2000 |
Inlet temperature (℃) | 140~350 | |||||
Outer temperature (℃) | 80~90 | |||||
Evaporated amount of moisture (kg/h) | 5 | 25 | 50 | 100 | 150 | 200~2000 |
Revolution (rpm) | 25000 | 18000 | 18000 | 18000 | 15500 | 8000~15500 |
Diameter of atomizing disc (mm) | 50 | 120 | 120 | 120 | 150 | 180~240 |
Heat source | Electricity | Electricity | Steam+electricity, oil, fuel, gas | Solved by user | ||
Max. power of electric heater (kw) | 9 | 48 | 72 | 81 | 99 | / |
Overall dimensions (m) | 1.8X0.93X2.2 | 3X3.2X5.1 | 3.7X3.2X5.1 | 4.6X4.2X6 | 5.5X4.5X7 | 1800 |
Recovery rate of dry powder (%) | ≥95 |
Send your inquiry directly to us