Place of Origin:
CHINA
Brand Name:
XINYU
Model Number:
LPG300
Energy Saving Stainless Steel Tomato Centrifugal Spray Dryer
Equipment design conditions
Name of material:
Solid content:About 45-50%
Final moisture content:≤5%
Inlet air temperature:180-200℃
Exhaust temperature:90-100℃
Rotating speed frequency:40-50HZ
Drying tower diameter:ф4600 mm
The atmospheric pressure: 760mmHg
Ambient temperature:25℃
Absolute humidity:90%
Power supply:380V,3Phase,50hz
Working principle of centrifugal spray dryer
Benefits
1. Stainless steel material, arc corner design and polyester powder coated shell, prevents corrosion of acidity and alkaline air effectively.
2. Imported Schneider electrical components which is more stability.
3. PLC control system, make your research more easier and efficient.
4. Build in oil-free air compressor, without any noise.
5. Self-priming peristaltic pump, avoid secondary pollution, make sure whole process conducted steady and smoothly.
6. Narrow size distribution, more than 95% of the dry powders are in the same range of particles.
7. Innovative tower wall purging device, improves the material recycling rate.
8. High speed of drying, after spraying of the material liquid, the surface area of material will be increased greatly, make your research more efficient.
9. In the hot-air flow, 95%~98% of water can be evaporated at a moment. You can finish material drying only in several seconds.
10. Especially suitable for drying the heat sensitive materials, after drying, there's no need for smashing and sorting, so as to reduce the operation procedures and save your time.
Equipment technical parameter table
Water evaporation | 300Kg/h(max) | Tower diameter/tower height | 4.60M/10.5M |
Operating temperature | Inlet Temperature 200℃/Outlet Temperature 90℃ |
Atomizer LPG-300 |
Speed:14000r.p.m Diameter:180mm |
Power | Drive 70KW | ||
Oil consumption | 50-60kg/h | System heat | 50X104Kcal/h |
Pressure air consumption | 0.5m3/min | System air volume | About 12000 m3/h |
Drying system type | Open circulation system | Feeding mode | Automatic screw pump stable feeding | ||
Hot air contact mode | Parallel flow mode | Heat source mode | Oil-fired hot air stove | ||
Product collection mode | Cyclone+water film | Atomization mode | Centrifugal atomization | ||
Control mode | Arbitrary setting, automatic control of inlet air temperature, digital display temperature, pressure, pressure difference, frequency conversion to adjust atomization speed, etc. Touch screen display work flow / PLC fuzzy control variable parameters and so on | ||||
Overall Size | See the ref picture | Weight | 12T | ||
Environment condition | Full pressure:760mmHg,Temperature200C,Relative humidity:80% | Electric source | 3Phase,380V,50HZ |
Process flow diagram
Send your inquiry directly to us